Toshiba PDR-M500, Инструкция по эксплуатации

Страница: 82 / 120

Playing Back
Photographed Images
Deleting
Photographed Images
Connecting to
the PC
Other Useful
Information
Additional
Information
Getting
Ready
Preface
T
aking
Photographs
82
Erasing Images
Turn the mode dial to one of [ ] [ ] [ ] [ ].
If you selected [ ], select the image you want to
erase with the button.
If you selected [ ] [ ] [ ], the last image will be erased.
Press the erase button.
The [ ] and the menu appears on screen.
Select [ ] with the button, and press the OK button.
The message “ERASE?” is displayed.
Select [YES] with the button, and press the OK button.
This erases the image, and the camera returns to the mode selected on the mode dial.
To not erase, select [NO], and press the OK button.
If the message “Protected” appears on screen, remove the protection ( page 77) or
cancel the DPOF setting ( page 75).
To continue erasing images, repeat steps from 2 to 5.
Erase images. Note, however, that protected images ( page 76) or images on a write-
protected SD card ( page 15) cannot be erased.
Please note that the cleared images cannot be restored.
• Even if you take photographs after erasing an image, file are assigned serial numbers
from the next number from the very last number assigned after the image was erased.
• Images can also be erased in the thumbnail display. In the case of the thumbnail
display, the screen changes temporarily to the single image (frame) playback state.
After the image is erased, the screen returns to the thumbnail display.
Memo
ERASE ONE IMAGE
Erase individual images one image at a time.
MENU
OK
MENU
OK