0
Macintosh Ethernet and Wireless Network Configuration
The following screens describe how to configure the network settings for a Macintosh
OS 9 computer.
Macintosh OS 9 Configuration
Ethernet Settings
Step 1: At the Macintosh desktop, click the
Apple icon at the top left of the screen,
select “
Control Panel
”, and then click on
the “
TCP/IP
” listing on the side panel.
Step 2: In the TCP/IP (Setup Ethernet)
panel, select the Ethernet port you are using
to connect your Macintosh to the PCX5000
in the Show choice box. The default port is
“
Built–in Ethernet
”. Then select “
Using
DHCP Server
” in the
Configure
choice box.
Close the panel by clicking on the top left
corner. You will be prompted to save the
configuration.
Step 3: You should now be able to access
the
PCX5000 Configuration Pages.
Launch the browser supplied with the
Macintosh and open location:”
http://192.168.100.1
” Proceed to the
Configuring the PCX5000
section of this
manual.