36
Playback (VCR)
Cassette tape playback
To play a prerecorded tape.
Load a prerecorded tape:
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
Preparation:
• Press
TV/VCR
to select the TV/VCR mode.
1
Press
PLAY
on the front panel or on
the remote.
Playback will start. “
” will appear
on the screen for about 4 seconds.
Press
STOP/EJECT
once on the front
panel or press
STOP
on the remote.
The tape will stop but remain fully
loaded and ready to play.
“
” will appear on the screen for
about 4 seconds.
To stop playback:
Stop the playback or recording with
STOP
.
To stop the tape-winding, press
STOP
. To switch to play-
back directly (without
STOP
), press
PLAY
.
Notes:
• If you play a prerecorded tape after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
• This unit selects the playback tape speed SP or SLP auto-
matically.
• When you select the TV/VCR mode during DVD playback, DVD
playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.
2
To start playback:
Playback
Rewind or forward the tape
To rewind the tape:
Press
REW
on the front panel or press
REV
on the remote.
To forward the tape:
Press
FF
on the front panel or press
FWD
on the remote.
Forward/Reverse picture search mode
PLAY
STOP
REV
FWD
REV
PLAY
STOP
FWD
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press
REV
or
FWD
again and hold it down. The unit will resume the
tape winding as soon as the button is released.
PHONES
L/MONO R
REW
PLAY
FF
REC/OTR
CHANNEL
OPEN/CLOSE
VOLUME
SKIP
STOP
PLAY
SKIP
POWER
POWER
REC/OTR
TIMER REC
STOP/EJECT
LINE IN 2
VIDEO
PLAY
FF
REW
STOP/EJECT
AUDIO
PLAY
STOP/EJECT
REW
FF
Illustration of MW20FN1/R
5F10101C (E)p35-39
7:5:03, 18:57
36