23
TV operation
To turn on the unit, press POWER.
1
POWER
TV operation
Press the Direct channel selection buttons to
select the channel.
TV mode direct channel selection -
When TV/CATV menu is in the TV position, all
channels can be instantly selected by using two
buttons. (for example, to select channel 2, press “0”,
then “2”. If you press only “2”, channel selection will be
delayed for two seconds.) For channels 10 and above,
press the 2 digits in order.
CATV mode direct channel selection -
When TV/CATV menu is in the CATV position, channels
can be selected as follows:
TO SELECT CATV CHANNELS:
1-9
Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press “002”.
10-12
Press “0”, then the remaining 2 digits.
Example, to select channel 12, press “012”.
13-99
Press the 2 digits in order. Example, to
select channel 36, press “36”.
100-125
Press the 3 digits in order. Example, to
select channel 120, press “120”
.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 button is pressed, the corresponding
channel will be selected in 2 seconds.
5
Adjust the volume level by pressing VOLUME
▲
or
▼
.
The volume level will be indicated
on the screen by green bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of green
bars also decreases.
3
Set TV/CATV menu to the appropriate position
(See page 26).
4
TV Operation
VOLUME
VOLUME
32
CH 012
0
8
7
9
6
5
4
3
2
1
Notes:
•
If a channel with no
broadcast is selected,
the sound will
automatically be muted.
•
If a station being viewed
stops broadcasting, the
TV will automatically shut
itself off after 15 minutes.
VHF/UHF/CATV CHANNELS
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
5
1
3
TV - VHF/UHF channels
CATV - CABLE TV channels
TV operation
Press TV/VCR to select the TV/VCR mode.
2
TV/VCR
2
5F10101C (E)p23-30
7:5:03, 18:56
23
