Toshiba MMD-AP0726HP-E, Руководство по установке

Страница: 25 / 30

48-EN 47-EN
– 24 –
EN
EN
EN
EN
Check code Wireless remote controller
Check code name Judging device
Wired remote
controller display
Outdoor unit 7-segment display Sensor block display of receiving unit
Auxiliary code Operation Timer Ready Flash
L05 — — SIM
Duplicated indoor units with priority (Displayed in indoor unit with
priority)
l/F
L06 L06 No. of indoor units with priority SIM
Duplicated indoor units with priority (Displayed in unit other than
indoor unit with priority)
l/F
L07 — — SIM Group line in individual indoor unit Indoor unit
L08 L08 — SIM Indoor unit group/Address unset Indoor unit, l/F
L09 — — SIM Indoor unit capacity unset Indoor unit
L10 L10 — SIM Outdoor unit capacity unset l/F
L17 L17 — SIM Outdoor unit type mismatch error l/F
L20 — — SIM Duplicated central control addresses Indoor unit
L28 L28 — SIM Too many outdoor units connected l/F
L29 L29 Number of IPDU (*1) SIM No. of IPDU error l/F
L30 L30 Detected indoor unit address SIM Indoor unit outside interlock Indoor unit
— L31 — — Extended l/C error l/F
P01 — — ALT Indoor fan motor error Indoor unit
Р 0 З Р 0 З — ALT Discharge temp. TD1 error l/F
P04 Р 04
01: Comp. 1 side
02: Comp. 2 side
ALT High-pressure SW system operation IPDU
P05 Р 05
00:
01: Comp. 1 side
02: Comp. 2 side
ALT
Phase missing detection/Power failure detection
Inverter DC voltage error (comp.)
Inverter DC voltage error (comp.)
Inverter DC voltage error (comp.)
l/F
P07 Р 07
01: Comp. 1 side
02: Comp. 2 side
ALT Heat sink overheat error IPDU, l/F
P10 Р 10 Detected indoor unit address ALT Indoor unit over fl ow error Indoor unit
P12 — — ALT Indoor unit fan motor error Indoor unit
P13 Р 13 — ALT Outdoor liquid back detection error l/F
P15 Р 15
01: TS condition
02: TD condition
ALT Gas leak detection l/F
P17 Р 17 — ALT Discharge temp. TD2 error l/F
P18 Р 18 — ALT Discharge temp. TD3 error l/F
P19 Р 19 Detected outdoor unit number ALT 4-way valve inverse error l/F
P20 Р 20 — ALT High-pressure protective operation l/F
P22 Р 22
#0: Element short circuit
#E: Vdc voltage error
#1: Position detection circuit error
#2: Input current sensor error
#3: Motor lock error
#C: Sensor temperature error (No TH sensor)
#4: Motor current error
#D: Sensor short circuit/release error (No TH sensor)
#5: Synchronization/step-out error
*Put in Fan IPDU No. in [#] mark.
ALT Outdoor unit fan IPDU error IPDU
P26 Р 26
01: Comp. 1 side
02: Comp. 2 side
ALT G-TR short protection error IPDU