157
Step Component
Procedure
Remarks
5
Inverter
assembly
(continued)
6) Remove the terminal cover of the compressor,
and disconnect the compressor leads from the
compressor. (Fig. 5-6)
WARNING
The quick connect terminals of the
compressor lead wires may become
loose when they are disconnected. When
reconnecting them, crimp them slightly with
radio pliers or the like and ensure they are not
loose before reinsertion. The quick connect
terminals could overheat and cause a fi re if
loose.
7) Remove the screw of the inverter assembly
and inverter fi xing plate (lower).
(M4×10, 1 ) (Fig. 5-7)
8) Lift up on the inverter assembly and move it
forward and out. (Fig. 5-8, 5-9)
(Fig. 5-9)
Inverter assembly
Inverter assembly
Ɣ
Remove the inverter assembly.
(Fig. 5-8)
Thermostat
Compressor leads
Black
Red
Put on the
sleeve.
White
Notes on Compressor Leads
&RQQHFWHDFKFRPSUHVVRUOHDGZLUHWRLWV
designated terminal.
'RQRWSUHVVWKH
quick connect terminals
WZLFH
$IWHUGLVFRQQHFWLQJWKH
quick connect
terminals
that have been inserted once,
replace the compressor leads.
0DNHVXUHWRNHHSWKHH[SRVHGFRPSUHVVRU
OHDGZLUHVVWUDLJKW
%HFDUHIXOQRWWRDSSO\H[FHVVVWUHVVWRWKH
WHUPLQDOVDQGOHDGZLUHV
$WWDFKWKHWHUPLQDOFRYHUDIWHUSDVVLQJWKH
OHDGZLUHVWKURXJKWKHEXVKLQJ$WWKLVWLPHEH
FDUHIXOQRWWROHWWKHOHDGZLUHVJHWFDXJKWLQ
WKHJDSZLWKWKHWHUPLQDOFRYHU
Thermostat
Compressor leads
Black
Red
Put on the
sleeve.
White
(Fig. 5-6)
Scre
Z
(1 position)
(Fig. 5-7)
A10-1510.indb 157
A10-1510.indb 157
2016/04/08 17:21:24
2016/04/08 17:21:24
AMP Air Conditioning
www.ampair.co.uk | [email protected]
