Enhancements for SIP in IPedge Release 1.5 and the IP4100
New Features Available In IPedge Software Release R1.5
5 of 16
Pickup
Any station with the appropriate Class of Service will now be able to answer a call on Hold from a SIP
station. When SIP stations place calls on hold, the IPedge system will now treat that as “Line Hold” rather
than “Consultation Hold” to allow the call to be picked up.
Conference Calls on the Toshiba IP4100 SIP Phone
This new release of software for the IP4100 supports Conference Call initiation.
Conference Support
IPedge Systems (R1.5 and later) support two SIP channels per station. This allows the IP4100 to receive a
call (call waiting notification) while on a call. Additional licenses for the additional SIP channels are not
required.
Base Station Configuration
The software profile of the IP4100 base station must be changed to support Conference Call features
IPedge R1.5. Use the following procedure.
1.
Determine IP address of IP4100-Base by using an IP4100-DECT handset IP Search Tool. To select
Menu *IP* press the
Menu
key, then *
47*
keys.
2.
Login to IP4100-Base web configuration GUI via a PC web browser.
3.
Select the
Servers
page and click the appropriate Server (Server 1:<IP address>).
4.
Change the
PBX type
to
IPedge.
5.
Click
Save
.
Note
Do not exit the utility until you have tested the new features
.
6.
Make a test call with an IP4100 handset to ensure that the conferencing soft keys (
Conf
and
Swap)
, now
appear on the handset(s). In multi-cell systems this change only needs to be made in one base station. The
parameter change will be sent to all of the other base stations.
If the conferencing features do not appear, click on the
Multi cell
link and click
Force reboot chain
.
Note:
All calls will be disrupted during the reboot period.
