45
Installation
Appendix
Introduction
How to Use
Defi
nitions in
Confi
guration
Enable motion detection
Check this option to turn on motion detection.
Click on this button to add a new window. At most three windows can exist
simultaneously. Use the mouse to click, hold, and drag the window frame to resize or
to move the title bar. Clicking on the x' at the upper right-hand corner of the window
deletes the window.
Click on this button to save the settings. A graphic bar will rise or fall
depending on the image variation. A green bar means the image variation is under
monitoring level and a red bar means the image variation is over monitoring level.
When the bar goes red, the detected window will also be outlined in red. Going back
to the homepage, the monitored window is hidden but the red frame shows when
motion is detected.
"Window Name"
The text will show at the top of the window.
Sensitivity
This sets the endurable diff erence between two sequential images.
Percentage
This sets the space ratio of moving objects in the monitoring
window. Higher sensitivity and small percentage will allow easier motion detection.
The following fi gure shows the screen when
is clicked.
<url> http://<Network Camera>/setup/motion.htm
<Network Camera> is the domain name or original IP address of the Network
Camera.
Motion detection
