36
Installation
Appendix
Introduction
How to Use
Defi
nitions in
Confi
guration
RTSP Streaming
Authentication
It supports disable, basic and digest modes.
Access name for stream 1
Access URL of stream 1 for making connection from
the client software when using the MPEG-4 codec.
Access name for stream 2
Access URL of stream 2 for making connection from
the client software when using the MPEG-4 codec.
Using rtsp://<ip address>/<access name> to make connection.
RTSP port
The port can be changed to another number other than the default
Port 554.
RTP port for video
The video channel port for RTP must be an even number.
RTCP port for video
The video channel port for RTCP must be the port number of
video RTP plus 1.
RTP port for audio
The audio channel port for RTP must be an even number.
RTCP port for audio
The audio channel port for RTCP must be the port number
of audio RTP plus 1.
User can modify Multicast setting for stream1 and stream2.
Always multicast
Select it to enable when connecting over 10 multicast clients.
Multicast group address
Used by sources and the receivers to send and receive
content.
Multicast video port
The video channel port for multicast must be an even
number.
Multicast RTCP video port
The video channel port for multicast RTCP must be
the port number of multicast video port plus 1.
Multicast audio port
The audio channel port for multicast must be an even
number.
Multicast RTCP audio port
The audio channel port for multicast RTCP must be
the port number of multicast audio port plus 1.
Multicast TTL
Specifies the number of routers (hops) that multicast traffic is
permitted to pass through before expiring on the network.
Network settings (Cont.)