Toshiba IK-TU61, Инструкция по эксплуатации

Страница: 11 / 53

- 11 -
DC IN 12V DC IN/SYNC S-VIDEO RGB
1 +12V 1 GND 1 GND 1 GND(for VBS,Y/C)
2 +12V 2 +12V 2 GND 2 GND(for R/G/B,Y/P
R
/P
B
)
3 GND 3 GND(for INDEX) 3 Y 3 R/P
R
OUT
4 GND 4 INDEX 4 C 4 G/Y OUT
5 GND(for HD) 5 B/P
B
OUT
6 HD OUT 6 VBS/Y OUT
7 VD OUT 7 SYNC OUT
8 GND(for TRIGGER) 8 GND(for SYNC)
9 TRIGGER 9 -/C OUT
10 VD IN
11 HD IN
12 GND(for VD)
DIGITAL
1 R0 (+) 31 R0 (-) 61 GND 91 GND
2 R1 (+) 32 R1 (-) 62 PIXEL CLK (+) 92 PIXEL CLK (-)
3 R2 (+) 33 R2 (-) 63 FRAME EN (+) 93 FRAME EN (-)
4 R3 (+) 34 R3 (-) 64 FIELD ID (+) 94 FIELD ID (-)
5 R4 (+) 35 R4 (-) 65 LINE EN (+) 95 LINE EN (-)
6 R5 (+) 36 R5 (-) 66 TRIGGER D (+) 96 TRIGGER D (-)
7 R6 (+) 37 R6 (-) 67 RESERVE (OUT +) 97 RESERVE (OUT -)
8 R7 (+) 38 R7 (-) 68 GND 98 GND
9 R8 (+) 39 R8 (-) 69 GND 99 GND
10 R9 (+) 40 R9 (-) 70 NC 100 NC
11 G0 (+) 41 G0 (-) 71 NC 101 NC
12 G1 (+) 42 G1 (-) 72 NC 102 NC
13 G2 (+) 43 G2 (-) 73 NC 103 NC
14 G3 (+) 44 G3 (-) 74 NC 104 NC
15 G4 (+) 45 G4 (-) 75 NC 105 NC
16 G5 (+) 46 G5 (-) 76 NC 106 NC
17 G6 (+) 47 G6 (-) 77 NC 107 NC
18 G7 (+) 48 G7 (-) 78 NC 108 NC
19 G8 (+) 49 G8 (-) 79 NC 109 NC
20 G9 (+) 50 G9 (-) 80 NC 110 NC
21 B0 (+) 51 B0 (-) 81 NC 111 NC
22 B1 (+) 52 B1 (-) 82 NC 112 NC
23 B2 (+) 53 B2 (-) 83 NC 113 NC
24 B3 (+) 54 B3 (-) 84 NC 114 NC
25 B4 (+) 55 B4 (-) 85 GND 115 GND
26 B5 (+) 56 B5 (-) 86 GND 116 GND
27 B6 (+) 57 B6 (-) 87 TXD 117 NC
28 B7 (+) 58 B7 (-) 88 RXD 118 NC
29 B8 (+) 59 B8 (-) 89 GND 119 NC
30 B9 (+) 60 B9 (-) 90 GND 120 GND
* When using pins to remote(pins 87 to 89), please consult with your dealer.
Precautions on DIGITAL terminal :
･ Interference occurring inside the cable may accidentally activate the Trigger if the TRIGGER D
inputs (pins 66 and 96) are open.
If the TRIGGER D input is not used, the TRIGGER D input pin should be either not connected or
connected to RESERVE output pin (pins 67 and 97) ie: (connect pin 66 to pin 67 and pin 96 to 97).
･ The RESERVE pins (pins 67 and 97) are provided for an additional output. If unused they should be
OPEN or connected to Trigger D.
･
NC pins (pins 117 to 119) should be left OPEN.
5 ． ． ． ． 3A Connector Pin Assignments