User’s Manual
EN-7
TOSHIBA Hi-Speed Port Replicator II
Back view
The following illustration shows the back of the Toshiba Hi-Speed Port ReplicatorII. For a description of
each component, please refer to the table below.
(Sample Illustration) The back of the Toshiba Hi-Speed Port ReplicatorII
When your computer is docked in the port replicator, the following ports on the computer, if present,
are not operational:
■
Network port
■
Monitor ports (RGB)
■
Audio ports (Microphone jack or Headphone/Line out)
If you want to use the docked computer’s audio ports, you can enable them as shown in “configuring
audio ports”
section
. Otherwise, use the ports on the port replicator instead.
Component
Description
Microphone jack
A standard 3.5 mm mini jack for mono audio input from a microphone.
Line out
(Headphones,
Speakers)
A standard 3.5 mm mini jack for audio output to speakers,
a headphone or headset, or other audio out devices.
LAN active light
Glows orange when the computer is exchanging data with the
network.
Network port
Connection point for a network cable.
Supports:
*Ethernet (10 megabits per second, 10BASE-T)
*Fast Ethernet (100 megabits per second, 100BASE-T)
*Gigabit Ethernet (1000 megabits per second, 1000BASE-T)
Note:
Gigabit Ethernet support is only available if your computer
model also supports it.
LAN connected light
LAN active light
Line out (Headphone, Speakers)
Microphone jack
Network port
USB 2.0 port
USB 3.0 port
HDMI port
DisplayPort
Slider
DC-IN (19V)
Security lock slot
Port Replicator lock switch
RGB monitor port
Serial port
NOTE
Toshiba Hi Speed Port ReplicatorII_UM.fm Page 7 Thursday, January 13, 2011 2:00 PM
