GX7R ASD Quick Start Guide
35
System Configuration and Menu Options
Root Menus
The
Mode
key accesses the three primary screens of the
GX7R ASD
: the
screen,
the
screen, and the
screen. From either screen, press the
Mode
key to loop through to
the other two screens (see
). While on the
Frequency Command
screen, pressing the
ESC
key
toggles the menu to and from the
and the
Frequency Command
screen.
Note:
Parameter changes made from the
Panel
menu are effective for
Local
EOI control
Only
.
Figure 22. GX7R ASD Root Menu Mapping.
Frequency Command Screen
Frequency Setting
While operating in the
Local
mode (Local|Remote LED is illuminated), the running frequency of the
motor may be set from the
screen. Using the
Rotary Encoder
, enter the
Frequency
Command
value and then press the
Run
key. The motor will run at the
Frequency Command
speed and
may be changed while running.
Scrolling Monitor
The Output Current and the ASD Load values are displayed below the
parameter of
the
Frequency Command
screen (default setting). Other user-selected parameters may be displayed on
this screen for quick-access monitoring while running. These parameters may be accessed and enabled for
display by placing a check in the box next to the item listed at Program
Monitor Setup
Scrolling
Monitor
. If no parameters are enabled for display,
No Items
is displayed.
When more than two items are selected for display the items are scrolled automatically. The display time
for each selected item may be set from 1 to 60 seconds. The parameters that may be displayed on the
Scrolling Monitor
are listed in the section titled
Содержание GX7R ASD
Страница 1: ...GX7R ASD Quick Start Guide TOSHIBA GX7R ASD Quick Start Guide DN 68986 002 September 2014 ...
Страница 2: ...GX7R ASD Quick Start Guide DN 68986 002 September 2014 ...
Страница 76: ...68 GX7R ASD Quick Start Guide Figure 23 480 Volt 30 100 HP GX7R ASD ...
Страница 77: ...GX7R ASD Quick Start Guide 69 Figure 24 480 Volt 125 150 HP GX7R ASD ...
