Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 945 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 924 -
Table 5.4-4 Setting items for binary input circuits in the variable type (i.e., BI2A module)
Setting devices Range
Uni
ts
Contents Default
Common
BI1-3_PICKUP 18 to 222 V Guaranteed-minimum-pick-ups at BI1, BI2, and BI3 77
BI4-6_PICKUP 18 to 222 V Guaranteed-minimum-pick-ups at BI4, BI5, and BI6 77
BI7-9_PICKUP 18 to 222 V Guaranteed-minimum-pick-ups at BI7 to BI9 77
BI10-12_PICKUP 18 to 222 V Guaranteed-minimum-pick-ups at BI10 to BI12 77
CMP_NUM 4 to 9 – Number of times in the filter 4
BI1_CPL Off/On – Switch for programmable operation in BI1 Off
BI1 On Delay Timer 0.000 to 300.000 s Value in the on-delay timer 0.000
Off Delay Timer 0.000 to 300.000 s Value in the off-delay timer 0.000
INVERSE-SW Normal / Inverse – Inversion operation of BI1 signal Normal
BI2_CPL Off/On – Switch for programmable operation in BI 2 Off
BI2 On Delay Timer 0.000 to 300.000 s Value in the on-delay timer 0.000
Off Delay Timer 0.000 to 300.000 s Value in the off-delay timer 0.000
INVERSE-SW Normal / Inverse – Inversion operation of BI2 signal Normal
BI3_CPL Off/On – Switch for programmable operation in BI 3 Off
BI3 On Delay Timer 0.000 to 300.000 s Value in the on-delay timer 0.000
Off Delay Timer 0.000 to 300.000 s Value in the off-delay timer 0.000
INVERSE-SW Normal / Inverse – Inversion operation of BI3 signal Normal
….. ….. ….. ….. …..
BI n _CPL Off/On – Switch for programmable operation in BI n Off
BI
n
4
On Delay Timer 0.000 to 300.000 s Value in the on-delay timer 0.000
Off Delay Timer 0.000 to 300.000 s Value in the off-delay timer 0.000
INVERSE-SW Normal / Inverse – Inversion operation of BIn signal Normal
4
Note: BI1_CPL~BI12_CPL settings are provided for the BI2A module.
As an example, Figure 5.4-1 shows the binary input circuit of the BI1A in order to help
understand the settings. The BI1A consists of 18 binary input circuits and each circuit has
three settings:
Setting threshold level
Comparison feature for contact chatter
CPL switches (“Delayed pick-up and delayed drop-off signal” and “Logic level
inversion”), used as basis of input signal characteristics.