Toshiba GD-1221, Руководство оператора

Страница: 35 / 264

Sending a Fax 33
Sending a Fax
Transmission Mode
y Memory Transmission
The original is scanned into memory and automatically starts to be sent once a connection
has been made. Using this mode, you can send the same original to 2 or more remote Faxes
(multi-address transmission).
y Direct Transmission
The remote Fax is dialed immediately, and the original will be sent as it is being scanned.
This mode is useful if you want to confirm connection to the remote Fax or when you want to
send an urgent Fax document. Originals are not stored in memory, and you can only specify
one remote Fax at a time.
y Keypad Dialing
You can dial the telephone number of the remote Fax directly using the dial keypad.
y Abbreviated Dial Number Dialing
You can dial the telephone number of the remote Fax by designating an Abbreviated Dial
Number registered beforehand.
y One Touch Dialing
You can specify a remote FAX by pressing a One Touch Key registered beforehand.
y Speed Dialing
You can access Abbreviated, Alphabet, or Group dialing telephone directories registered
beforehand.
y
On-hook dialing
You can make a telephone call and then send the originals without picking up the handset of
the external telephone. When the line is connected to the remote Fax and a dial tone (short
high-pitched tone) is heard, press the [START] button to send the original. You can also use
keypad dialing, speed dialing, and one touch dialing.
y Off-hook dialing
Pick up the external telephone, make a telephone call and then send the originals. When the
line is connected to the remote Fax and a response tone (short high-pitched tone) is heard,
press the [START] button to send the original. You can also use keypad dialing, speed dial-
ing, and one touch dialing.
y Redialing
If the remote Fax is busy by using the Memory TX etc., this system will automatically redial
the remote Fax number. The default of the redialing intervals and counter is different for each
country/region. It can be changed by the service technician.
You can also use the [REDIAL/PAUSE] button to redial the remote Fax number manually
(Manual Redialing).
y Chain Dial Communication
When using the Fax communication network, you can combine 2 or more dialing operations
(by address book and direct entry), input and send information such as service codes one
after another.