manualshive.com logo in svg

Toshiba GD-1060, Руководство по обслуживанию

Поделиться
Скачать
Toshiba GD-1060 Скачать руководство пользователя страница 69

January 2001 © TOSHIBA TEC

5 - 5

GD-1060 CIRCUIT DESCRIPTION

The scanner unit has the exposure lamp’s light irradiated to the original placed for transmission. At this

time, it converts the light reflected from the original into electrical signals through the CCD. Then the

A/D converter (IC3) converts the electrical signals into digital signals. The scanner control GA (IC11)

converts them into parallel signals and processes them for correction, converts them into raster data

(digital image data), and sends it to the scanner I/F of the PTC GA (IC36).

The raster data is arranged in words (16 bits) by the scanner I/F and transferred in DMA mode to the

PIX-SDRAM (IC9, IC13, IC15, IC19) where it is stored. During this period, this machine also commu-

nicates with the destination and determines the coding method for transmit data.

The raster data is transferred in DMA mode through the CODEC I/F-1 of the PTC GA to the CODEC

(IC1) installed on the FAX PWA. Then the CODEC converts the raster data into the data coded in

JBIG.

The JBIG data is transferred in DMA mode through the CODEC I/F-1 to the system-SDRAM (IC32)

where it is stored. Then the JBIG data of the original(s) is stored in the SDRAM.

The stored JBIG data is transferred in DMA mode through the CODEC I/F-1 to the CODEC. Then the

CODEC converts the JBIG data into the raster data, and stores it in the SRAM (IC2,3).

The raster data is transferred in DMA mode through the CODEC I/F-1 to the PIX-SDRAM where it is

stored.

The raster data is transferred in DMA mode through the CODEC I/F-1 to the CODEC. Then the

CODEC converts the raster data into the coded data (MH, MR, MMR or JBIG) to meet the destination.

The coded data is transferred in DMA mode through the CODEC I/F-1 to the system-SDRAM where

it is stored.

The coded data is transferred in DMA mode to the MODEM (IC4) installed on the FAX PWA. Then the

MODEM modulates the coded data into analog signals for the telephone line.

The analog signals are sent to the telephone line network through the NCU PWA. Then the data of the

original(s) is transmitted to the destination through the telephone line network.

Содержание GD-1060






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды