Toshiba GD-1060 Скачать руководство пользователя

Страница: 25 / 93

GD-1060 GENERAL

3 - 2

January 2001 © TOSHIBA TEC

Image memory communication function:

Picture data can be stored in the image memory. For a delayed transmission, the picture data created

by scanning Originals is stored in the image memory and to be transmitted at the designated time.

Other memory functions include multi-address transmission, substitute reception, ECM communica-

tion, etc.

The memory contents will be retained by a backup battery for up to 2 hours if a power failure occurs.

The memory size is 5.7 MB.

75 one touch keys:

The remote party’s address data can be registered to a one touch key. Communication options can be

registered for each address. Some one touch keys also operate as direct function access keys. For

further details, refer to page 3-9.

300 abbreviated dial numbers:

300 abbreviated dial numbers can be assigned in the range from No. 001 to 999.

Alternate number dialing:

It is possible to assign two facsimile telephone numbers to one abbreviated dial number or one touch

dial key (one as the primary telephone number and the other as an alternate telephone number). The

facsimile first dials the primary telephone number, then redials if the line is busy until the redialing limit

count is reached. It will then begin to dial the alternate number. (Except for Relay/Mailbox/Confidential/

Polling)

Multi-address transmission function:

Transmissions of the same original to multiple addresses (up to 375 addresses) are possible using

one operation sequence, in which preset abbreviated dial numbers (300), and one touch dial keys (75)

can be used. When the multi-key is specified, key pad dialing of up to 100 locations, is also possible.

Multi-polling reception:

Polling receptions from multiple remote parties (up to 375 parties) are possible using one operation

sequence, in which preset abbreviated dial numbers (300), and one touch dial keys (75) can be used.

When the multi-key is specified, key pad dialing of up to 100 locations, is also possible.

Relay transmission request function:

The GD-1060-NA/TW/AU/EU can originate a relay transmission or serve as a relay station in relay

transmission transactions.

Содержание GD-1060






























































































Результаты поиска

Содержание GD-1060

Отзывы:

Похожие инструкции для GD-1060

Бренды по названию

Популярные бренды

Toshiba GD-1060, Руководство по обслуживанию

Результаты поиска

Содержание GD-1060

Отзывы:

Похожие инструкции для GD-1060

Бренды по названию

Популярные бренды