Toshiba GA-1121, Руководство по управлению

Страница: 127 / 210

6
6-5 Imposition settings
Orientation
Use the Orientation menu to specify the orientation of a sheet. As an alternative to
rotating the sheet, you can perform custom rotations on any page in the main window,
as described in
“Rotating pages” on page 6-22.
Duplex
Use the Duplex menu to specify the relationship of content areas on opposing sides of
a sheet. Specify On for duplex (two-sided) printing or Off for simplex (one-sided)
printing.
When you choose On, the job is printed as duplex using a Top-Top setting, meaning
that the tops of pages on opposing sides of a sheet are located on the same edge (usually
the preferred choice for imposed book layouts).
Layout settings
A layout is a plan that specifies the number, ordering, and rotation of page images on
the sheet. DocBuilder Pro supports layouts of up to 25 pages per sheet, in a matrix of
up to 5 rows by 5 columns (50 pages duplex). All combinations of rows and columns
allow gang printing; however, only Gang Up layouts in the 5
x 5 matrix support
imposition.
N
OTE
:
If the number of pages in your job does not divide evenly into the number of
rows and columns in the layout you select, you may see some sheets with blank spaces.
The layout you select should correspond to the number of pages in your job.