TOSHIBA
6F3H1048
9.2.2
Operating Buttons
Table 9.3 shows the functions of the operating buttons on the graphic panel.
NOTES
Keep an operating button pressed for 0.5 seconds at least, when changing
UPS modes.
No.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Keep the reset button pressed for 5 seconds to reset the UPS.
The U PS may not respond if this duration is too short.
Table 9.3 Button fu nction
Name
Function
Remarks
RUN
To start up the UPS.
The UPS starts up when this button is
pressed.
(Key-Switch in OPERATION mode)
STOP
To stop the UPS.
The UPS stops when this button is
pressed.
(Key-Switch in OPERATION mode)
UPS
To transfer to normal operation
The UPS transfers to normal
from bypass operation
operation, if this button is pressed while
bypass operation.
(Key-Switch in OPERATION mode)
BYPASS
To transfer to bypass operation
The UPS transfers to bypass
from normal operation
operation, if this button is pressed while
normal operation.
(Key-Switch in OPERATION mode)
FLOAT
/
EQUAL
To flip the recharge mode
The UPS flips recharge voltage
between float charge and
between float charge
&
equalize charge.
equalize charge.
Equalize charge voltage can be
programmed as protection charge, with
battery overheat contact on, if desired.
(Key-Switch in OPERATION mode)
SCROLL UP
To scroll the LCD screens.
See Section 1 2.2.4 " LCD Scroll with
SCROLL DOWN
faults or warnings" and Section 1 0.2.4
" LCD Scroll" for details.
RESET
To reset the UPS faults and
warnings shown on the LCD.
- 26 -
www
. ElectricalPartManuals
. com
