Toshiba E-studio306lp, Быстрый старт

Страница: 6 / 72

4
Papers copied or printed using this equipment may need to be handled differently from normal ones due to the nature
of the erasable toner. Take note of the following points to avoid problems as a result of using this equipment.
Avoid the following actions as they may discolor the copy or printout.
Store for long period of time
Leave in places exposed to high temperature, such as inside of a car
Leave in places exposed to direct sunlight
Rub the print side hard with a rubber and the like
Do not use for printing addresses and certificates.
Reusability decreases sharply when paper ends are folded, or paper is torn. Do not keep unnecessary copies or printouts
tucked inside notebooks and the like. Erase with e-STUDIO RD30 immediately.
Paper written with normal writing utensils such as ballpoint pens and pencils cannot be erased, and therefore rejected
by e-STUDIO RD30. To make a note in a sheet of paper printed by e-STUDIO306LP use "FriXion" pens made by Pilot
Corporation.
e-STUDIO RD30 cannot make the erased information completely invisible. Take extra care when disposing of erased paper.
Do not user paper printed by this equipment and erased by e-STUDIO RD30 in any other multifunction system than this
equipment. This may cause malfunction.
•
•
•
•
Notes regarding papers copied or
printed with this equipment
To assure optimal printing performance, we recommend that you use only genuine TOSHIBA toner cartridges. If you use
a TOSHIBA-recommended toner cartridge, you can utilize the following three functions of this equipment:
Cartridge detecting function:
This function checks if the toner cartridge is correctly installed and notifies you if it is not.
Toner remaining check function:
This function notifies you when there is little toner remaining in the cartridge, as well as notifying it to your authorized
service representative automatically by the remote service.
Image quality optimization function:
This function controls image quality according to the characteristics of the toner to be used and enables you to print
images of an optimal quality.
If you are using a toner cartridge other than the one we recommend, the equipment may not be able to detect whether
it is installed or not. Therefore, even if the toner cartridge is correctly installed, the error message “TONER NOT
RECOGNIZED” appears on the touch panel and printing may not be performed. You may also not be able to utilize the
image quality optimization function, the toner remaining check function and the remote service function notifying your
authorized service representative automatically.
If you are using a toner cartridge other than the one we recommend, toner is not recognized. If this is a problem for you,
please contact your service representative. Remember you will not be able to utilize the Toner remaining check function
and Image quality optimization function as we mentioned.
•
•
•
Recommended toner cartridges