manualshive.com logo in svg

Toshiba e-STUDIO2820C, Руководство по обслуживанию, Страница: 325 / 486

Поделиться
Скачать
Toshiba e-STUDIO2820C Скачать руководство пользователя страница 325

6

© 2008 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO2820C/2830C/3520C/3530C/4520C

ERROR CODE AND TROUBLESHOOTING

6 - 59

[C270] Carriage home position sensor not going OFF within a specified time / Downloading firm-
ware with an incorrect modeltime

Remove the original glass and move the carriages to the paper feeding side. Turn ON the power and 
check the following items.

[C280] Carriage home position sensor not going ON within a specified time

Remove the original glass and move the carriages to the paper feeding side. Turn ON the power and 
check the following items.

Are the carriages slightly moved to the feeding direction?/Are the carriages staying at a posi-
tion other than home position?

YES 

Check if the circuits of the SLG board are abnormal.

NO
1. Check if the connector pin is disconnected or the harness is short circuited or open cir-

cuited.

2. Check if the conductor pattern on the SLG board is short circuited or open circuited.
3. Replace the SLG board.
4. If the model of the firmware downloaded is incorrect, a C270 error (exposure lamp blinks 

twice) occurs.
If the exposure lamp blinks twice, download the correct ROM.

Do the carriages make a big noise after they arrive at the home position?

|

|

|

YES 

The carriage home position sensor is not turned ON.
1. Check if the connector of the sensor is disconnected.
2. Check if the circuits of the SLG board are abnormal.

NO
The carriages are stopped at the home position and do not move.
1. Check if the connector pins are disconnected or the harnesses are short circuited or open 

circuited.

2. Check if the conductor pattern on the SLG board is short circuited or open circuited.
3. Replace the SLG board.

Содержание e-STUDIO2820C







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов