Toshiba e-STUDIO2820C Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 486

Toshiba e-STUDIO2820C Скачать руководство пользователя страница 164

e-STUDIO2820C/2830C/3520C/3530C/4520C

© 2008 TOSHIBA TEC CORPORATION All rights reserved

ADJUSTMENT

3 - 32

3.2.2

Density adjustment

The center density and the density variation controlled by density adjustment keys can be adjusted as
follows.

<Adjustment Mode (05)>

* If this setting has been changed, the density levels of the ”ACS”, “IMAGE SMOOTHING” or “Photo”

in the black mode may be affected.

<Adjustment Mode (05)>

Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ments according to the following procedure.

Note:

Be sure that this adjustment is made after performing

P.3-30 "3.2.1 Automatic gamma adjust-

ment".

<Procedure>

(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value.

(To correct the value once keyed in, press the [CLEAR] button.)

(4) Press the [ENTER] or [INTERRUPT] button to store the value.

→

The equipment goes back to

the ready state.

(5) Press the [FAX] button and then press the [START] button to make a test copy.
(6) If the desired image quality has not been attained, repeat step (2) to (5).

Color
mode

Original mode

Item to be

adjusted

Remarks

Text/

Photo*

Text*

Printed

Image*

Photo

Map

mono

Color

1585

1586

1587

1588

1589

center value

The larger the value is, the

darker the image becomes.

Acceptable values:

0 to 255 (Default: 128)

Color
mode

Original mode

Item to be

adjusted

Remarks

Text/

Photo

Text

User

custom

Black

503

504

931

Manual density

mode center value

The larger the value is, the darker the image

becomes.

Acceptable values:

0 to 255 (Default: 128)

508

510

937

Manual density

mode dark step

value

The larger the value is, the darker the dark

side becomes.

Acceptable values:

0 to 255 (Default: 20)

505

507

934

Manual density

mode light step

value

The larger the value is, the lighter the light

side becomes.

Acceptable values:

0 to 255 (Default: 20)

514

515

940

Automatic density

mode

The larger the value is, the darker the image

becomes.

Acceptable values:

0 to 255 (Default: 128)

«
...
162
163
164
165
166
...
»

Содержание e-STUDIO2820C







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов