Toshiba e-studio222cs, Руководство пользователя

Страница: 86 / 166

Faxing - e-STUDIO223CS and e-STUDIO263CS only > 86
M
ANAGING THE PHONE BOOK
The following section describes how to add/remove/modify speed and group dial entries to/
from the Phone Book.
A
DDING A SPEED DIAL ENTRY TO THE PHONE BOOK
The machine can hold up to 100 speed dial numbers in the phone book. To add a new speed
dial number to the phone book:
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to
Phone Book
and press OK .
3. Press OK to select
Speed Dial List
.
4. Using the arrow keys, scroll to the required entry position and press OK .
5. Press OK to select
Register
.
6. Press the Right arrow key to select
Name
.
7. Using the keypad or arrows keys and the on-screen keypad, type in the name.
8. Highlight
Done
and press OK .
9. Using the Down arrow key, scroll to
Fax Number
and press the Right arrow key.
10. Using the keypad, type in the destination fax number.
11. Highlight
Done
and press OK .
12. If required, use the arrow keys and scroll to
Group No.
then press the Right arrow
key.
13. Using the arrow keys, select the group number to assign the fax number to and
press OK .
The check box is selected. You can select multiple entries.
14. Press the Right arrow key to complete.
15. Press OK to confirm.
16. Press OK once more to add your entry to the phone book.
NOTE
The maximum length of name is 24 characters.
NOTE
The maximum length of number is 40 digits.
If the destination fax number has an “extension number”, press the
Pause
button between numbers. The machine will enter a pause when dialling.
If your MFP is connected to a PBX (private branch exchange), you will need to
add a Prefix in order to access to the outside line. Refer to the Configuration
Guide for details.
If you need to change the dialling method for the region, press the
Tone
button to change the call parameters for this particular number.
If you make a mistake while entering the number, press the Clear button to
delete the last digit.
NOTE
Numbers registered to groups from the Speed Dial function are synchronized
with the numbers that are registered to groups using the Group No. function.