Toshiba e-studio222cs Скачать руководство пользователя страница 4

Страница: 4 / 166

Disclaimer notice > 4

ISCLAIMER

NOTICE

The following notice sets out the exclusions and limitations of liability of TOSHIBA TEC

CORPORATION (including its employees, agents and sub-contractors) to any purchaser or

user (“User”) of the e-STUDIO222CS/223CS/263CS including its accessories, options and

bundled software (“Product”).

The exclusion and limitations of liability referred to in this notice shall be effective to

the fullest extent permissible at law. For the avoidance of doubt, nothing in this

notice shall be taken to exclude or limit TOSHIBA TEC CORPORATION’s liability for

death or personal injury caused by TOSHIBA TEC CORPORATION’s negligence or

TOSHIBA TEC CORPORATION’s fraudulent misrepresentation.

All warranties, conditions and other terms implied by law are, to the fullest extent

permitted by law, excluded and no such implied warranties are given or apply in

relation to the Products.

TOSHIBA TEC CORPORATION shall not be liable for any loss, cost, expense, claim or

damage whatsoever caused by any of the following:
(a)

use or handling of the Product otherwise than in accordance with the manuals,

including but not limited to Operator’s Manual, User’s Guide, and/or incorrect or

careless handling or use of the Product;

(b)

any cause which prevents the Product from operating or functioning correctly

which arises from or is attributable to either acts, omissions, events or accidents

beyond the reasonable control of TOSHIBA TEC CORPORATION including

without limitation acts of God, war, riot, civil commotion, malicious or deliberate

damage, fire, flood, or storm, natural calamity, earthquakes, abnormal voltage

or other disasters;

(c)

additions, modifications, disassembly, transportation, or repairs by any person

other than service technicians authorized by TOSHIBA TEC CORPORATION; or

(d)

use of paper, supplies or parts other than those recommended by TOSHIBA TEC

CORPORATION.

Subject to paragraph 1, TOSHIBA TEC CORPORATION shall not be liable to Customer

for:
(a)

loss of profits; loss of sales or turnover; loss of or damage to reputation; loss

of production; loss of anticipated savings; loss of goodwill or business

opportunities; loss of customers; loss of, or loss of use of, any software or data;

loss under or in relation to any contract; or

(b)

any special, incidental, consequential or indirect loss or damage, costs,

expenses, financial loss or claims for consequential compensation; whatsoever

and howsoever caused which arise out of or in connection with the Product or

the use or handling of the Product even if TOSHIBA TEC CORPORATION is

advised of the possibility of such damages. TOSHIBA TEC CORPORATION shall

not be liable for any loss, cost, expense, claim or damage caused by any

inability to use (including, but not limited to failure, malfunction, hang-up, virus

infection or other problems) which arises from use of the Product with

hardware, goods or software which TOSHIBA TEC CORPORATION has not

directly or indirectly supplied.

Содержание e-studio222cs







































































































































































Результаты поиска

Содержание e-studio222cs

Отзывы:

Похожие инструкции для e-studio222cs

Бренды по названию

Популярные бренды

Toshiba e-studio222cs, Руководство пользователя

Результаты поиска

Содержание e-studio222cs

Отзывы:

Похожие инструкции для e-studio222cs

Бренды по названию

Популярные бренды