Toshiba e-studio222cs Скачать руководство пользователя страница 29

Страница: 29 / 166

Paper recommendations > 29

ULTI

PURPOSE

TRAY

The multi purpose tray can handle the same sizes as the cassette trays but in weights up

to 220

g/m²

. For very heavy paper stock use the face up (rear) paper stacker. This ensures

that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths from 76mm to 215.9mm and lengths from

127.0mm to 1320mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and

128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes. Up to 10 envelopes can be loaded at

one time, subject to a maximum stacking depth of 10mm.

ACE

DOWN

STACKER

The face down stacker on the top of the printer can hold up to 150 sheets of 80g/m²

standard paper, and can handle paper stocks up to 176g/m².
Pages printed in reading order (page 1 first) will be sorted in reading order (last page on

top, facing down).

ACE

STACKER

The face up stacker at the rear of the printer should be opened and the tray extension

pulled out when required for use. In this condition paper will exit via this path, regardless

of driver settings.

The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle

stocks up to 220

/m².

Always use this stacker and the multi purpose feeder for paper stocks heavier than

176g/m².

UPLEX

Automatic two-sided printing on the same range of paper sizes as tray 2 (i.e. all cassette

sizes except A6), using paper stocks from 64 - 176g/m².

NOTE
The face up stacker cannot be used when printing duplex.

Содержание e-studio222cs







































































































































































Результаты поиска

Содержание e-studio222cs

Отзывы:

Похожие инструкции для e-studio222cs

Бренды по названию

Популярные бренды

Toshiba e-studio222cs, Руководство пользователя

Результаты поиска

Содержание e-studio222cs

Отзывы:

Похожие инструкции для e-studio222cs

Бренды по названию

Популярные бренды