Toshiba E-Studio167 Скачать руководство пользователя страница 75

Страница: 75 / 226

Zooming In/Out Copy Image 73

Place paper in the drawer.

Press the [COPY] button several times until the lamp of the desired
paper size is lit.

e.g.) Selecting LT size

You can select the desired paper size with the [DRAWER] button in the same procedure.

Press the APS/AMS selecting button until the AMS lamp is lit.

The reproduction ratio on the “copy mode” main screen will be changed to “AMS”.

Place the original.

Select the other copy modes as required, and then press the
[START] button.

Copying is performed with the most suitable reproduction ratio for the specified paper
size.

When “Change direction ORG” appears

The direction of the original placed is not correct. Press the [ENTER] button to exit the original.
Then place it by rotating 90 degrees and resume copying.

Содержание E-Studio167



































































































































































































































Результаты поиска

Содержание E-Studio167

Отзывы:

Toshiba E-Studio167, Руководство оператора, Страница: 75 / 226

Результаты поиска

Содержание E-Studio167

Отзывы: