manualshive.com logo in svg

Toshiba E-STUDIO 555, Руководство по копированию, Страница: 80 / 178

Поделиться
Скачать
Toshiba E-STUDIO 555 Скачать руководство пользователя страница 80

3 BASIC COPY MODES

78    Performing Copy & File

Performing Copy & File

With the Copy & File function, you can store the copied data in the share folder of the hard disk of this equipment or a 
specified PC on a network. The data can be stored in any of PDF, TIFF and XPS formats.

y

The “COPY & FILE” function is available only when the Scanner Kit or Printer/Scanner Kit (both optional) is 
installed.

y

Scanned data are stored at the resolution of 600 dpi only. The data stored with this function are suited for printing 
but not for being imported as an image into your PC. To obtain the optimal image quality for importing, it is 
recommended to store the data with the Scan to File function of this equipment.

y

The network administrator must make settings for Copy & File in advance. For details, refer to the 

TopAccess 

Guide

.

y

It is recommended to back up the data stored in the share folder.

You can store data in an e-Filing box with the Store to e-Filing function. For details, refer to the 

e-Filing Guide

.

1

Place the original(s).

2

Press [STORAGE] on the touch panel.

3

Press [COPY & FILE] on the touch panel.

Содержание E-STUDIO 555



















































































































































































Отзывы:

Нет отзывов