Toshiba E-STUDIO 555 Скачать руководство пользователя страница 147

Страница: 147 / 178

6.TEMPLATES

Registering Templates 145

6 TEMPLATES

Enter the necessary information about the group.

NAME:

Enter the name of the group. When you press it, the on-screen keyboard appears. Enter within 20 letters.

Be sure to enter it.

USER NAME:

Enter the name of the group owner as required. When you press it, the on-screen keyboard

appears. Enter within 30 letters.

PASSWORD:

Key in a password here, if you want to require a password to view the group or register templates

into the group. When you press it, the on-screen keyboard appears. Key in following the procedure below.

1) Press [PASSWORD], and then key in a 5-digit password.

The letters keyed in appear as asterisks (*).

2) Press [RETYPE PASSWORD], and then key in the password again.
3) Press [OK].

Press the [CLEAR] button on the control panel to delete a letter keyed in.

When you have entered all the necessary items, press [OK].
The new group is now registered and the menu moves to the one for registering templates.

Press the [FUNCTION CLEAR] button on the control panel.

The menu returns to the BASIC menu.

Registering templates into a private group

Set all the required functions.

Example: Editing function – image shift, reproduction ratio – 90%, number of copy sets – 10

Содержание E-STUDIO 555



















































































































































































Результаты поиска

Содержание E-STUDIO 555

Отзывы:

Toshiba E-STUDIO 555, Руководство по копированию, Страница: 147 / 178

Результаты поиска

Содержание E-STUDIO 555

Отзывы: