Toshiba E-STUDIO 555 Скачать руководство пользователя страница 26

Страница: 26 / 178

2 HOW TO MAKE COPIES

24 Placing Originals

Book-type originals

You can place book-type originals on the original glass.

Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.

Breaking the glass could injure you.

Raise the RADF.

Lower the RADF carefully.

Do not lower the RADF forcibly when the original is very thick. There will be no problem in copying even if it
is not fully lowered.

Do not look directly at the original glass because intensive light may escape during copying.

Open the desired page of the original and place it with
its face down. Align it against the left rear corner of
the original glass.

When you make 2-sided copies from book-type originals in modes
such as book-type original to 2-sided copying or dual page copying,
align the center of the original on the yellow indicator line of the original
glass.

P.75 “Making a 2-sided copy from a book-type original”

P.92 “Dual Page”

Содержание E-STUDIO 555



















































































































































































Результаты поиска

Содержание E-STUDIO 555

Отзывы:

Toshiba E-STUDIO 555, Руководство по копированию, Страница: 26 / 178

Результаты поиска

Содержание E-STUDIO 555

Отзывы: