manualshive.com logo in svg

Toshiba E-STUDIO 555, Руководство по копированию, Страница: 18 / 178

Поделиться
Скачать
Toshiba E-STUDIO 555 Скачать руководство пользователя страница 18

1 BEFORE USING EQUIPMENT

16    Placing Paper

„

Placing paper in the tandem large capacity feeder

y

Paper in the right-hand tray is used first. When it runs out, paper in the left-hand tray will be moved 
automatically to the right-hand tray and fed.

y

A maximum of 2500 sheets (80 g/m

2

) (20 lb. Bond) can be placed in the 2 trays. However the stack height 

of the paper must not exceed the line indicated inside the side guides.

 

 P.11 “Acceptable copy paper”

y

The copy side may be noted on its wrapping paper.

y

Be careful not to cut your fingers when fanning the paper.

y

When placing paper, be sure that the center lever is not open. (See the label attached in the tandem large 
capacity feeder.)

3

Push the drawer of the tandem large capacity feeder straight into this equipment 
carefully.

When the drawer is completely inserted, the right-hand tray will move up to the paper feeding position.

Be careful not to let your fingers be caught when pushing the drawer into this equipment. 

This could injure you.

1

Pull out the drawer of the tandem large capacity 
feeder carefully until it comes to a stop.

Be careful not to touch the slide rails (A in the figure).

This could injure you.

2

Place 2 stacks of paper in the right and left trays 
correspondingly.

Fan and jog the paper well before placing it. Place it with its copy side 
down. Place one stack of paper in the right-hand tray (shown as “A” in 
the figure) with its side touching the right corner of the tray, and place 
the other stack of paper in the left-hand tray (shown as “B” in the figure) 
with its side touching the left corner of the tray. Paper can be placed 
neatly if you divide stacks into small bundles and pile them up on the 
two trays alternately.

A

A

B

A

Содержание E-STUDIO 555



















































































































































































Отзывы:

Нет отзывов