Toshiba e-STUDIO 55 Скачать руководство пользователя страница 60

Страница: 60 / 179

USING THE

EDITING

FUNCTIONS

Place the originals on the original feed tray

or on the glass.

After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.

Place the original on the glass face down with
the bottom toward you and the left side
centred against the original scale.

Press the SET key.

The set margin default is 7 mm.

To change the margin:
Press the 0mm or 30mm key to select
the desired margin setting, and press the SET
key.

When combining image shifting with duplex
copying, select FRONT for the front side and
BACK for the back side of the copy.

Select the desired copy size, exposure,

reproduction ratio and copy quantity.

Tip:

Margins can be created also in the bypass
copy mode. To do this, set the paper in
the sheet bypass (see page 50), and press
the desired COPY-SIZE key to select the
paper size. If A4-R paper is used, press
the corresponding COPY-SIZE key twice.

Press the START key.

Содержание e-STUDIO 55




















































































































































































Результаты поиска

Содержание e-STUDIO 55

Отзывы:

Toshiba e-STUDIO 55, Руководство оператора по функциям копирования, Страница: 60 / 179

Результаты поиска

Содержание e-STUDIO 55

Отзывы: