manualshive.com logo in svg

Toshiba e-STUDIO 55, Руководство оператора по функциям копирования, Страница: 4 / 179

Поделиться
Скачать
Toshiba e-STUDIO 55 Скачать руководство пользователя страница 4

1

PREFACE

CONTENTS

PRECAUTIONS

PREFACE

Thank you for purchasing the Toshiba Digital Copier e-STUDIO55/65/80. This Operator’s Manual
describes the following:

• how to use the digital copier
• how to make copies
• how to inspect and carry out maintenance on the digital copier
• how to remedy mechanical and copying problems.

Before using the digital copier, thoroughly read and understand this Operator’s Manual. To ensure that
clean copies are made at all times and to make sure that the digital copier is in optimum working order,
keep this Operator’s Manual in a handy place for future reference.

COPYRIGHT 2000

TOSHIBA TEC CORPORATION

n

To ensure correct and safe use of the Toshiba Digital Copier e-STUDIO55/65/80, this Operator’s
Manual describes safety precautions according to the following three levels of warning:

Before reading this Operator’s Manual, you should fully understand the meaning and importance
of these signal words.
Warning ------

Indicates a potentially hazardous situation which, if not avoided, could result in
death, serious injury, or serious damage, or fire in the equipment or surrounding
area.

Caution -------

Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury, partial damage of the equipment or surrounding
area, or loss of data.

Note ------------

Indicates a procedure you should follow to ensure the optimal performance of
the digital copier and problem-free copying.

Tip --------------

Describes information useful to know when operating the digital copier.

Advice ---------

Describes an operation you should follow to maintain the digital copier in good
working order.

Warning

This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.

1. Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2. Before opening any covers or removing any units from the copier, discharge the static electricity

from your body by touching a metal part of the copier.

This product is carrying the CE-Mark in accordance with the related European Directives.
Toshiba Europe GmbH, Hammfelddamm 8,41460 Neuss, Germany. Phone +49-2131-158-01, is
responsible for CE-making.

Содержание e-STUDIO 55




















































































































































































Отзывы:

Нет отзывов