Toshiba e-STUDIO 55 Скачать руководство пользователя страница 132

Страница: 132 / 179

129

WHEN THE

GRAPHIC SYMBOLS

FLASH

Adding Paper to the Large-Capacity Feeder

Open the door of the large-capacity feeder.

Note:

If you want to add paper before the large-
capacity feeder runs out of paper, press
the TRAY DOWN

key before opening

the door. The elevator tray will
automatically move down.

Holding the whole ream of paper, place it

in the large-capacity feeder.

Make sure that all the sheets are placed neatly
aligned on the elevator tray.

Do not add paper above the limit line on the
inner guide.

Up to 4000 sheets of A4-size paper can be
placed.

Do not use creased, folded, wrinkled or damp
sheets of paper.

Close the door of the large-capacity feeder.

Push the door until it closes completely. The
elevator tray will automatically move up to
the paper feeding position.

TRAY DOWN key

Содержание e-STUDIO 55




















































































































































































Результаты поиска

Содержание e-STUDIO 55

Отзывы:

Toshiba e-STUDIO 55, Руководство оператора по функциям копирования, Страница: 132 / 179

Результаты поиска

Содержание e-STUDIO 55

Отзывы: