Toshiba e-STUDIO 332P, Руководство пользователя

Страница: 35 / 82

Paper recommendations > 35
> Envelopes should be loaded flap down, face up with the top edge to the left and
short edge into the printer.
> Load Transparencies face up and top edge into the printer.
> For heavyweight paper or cardstock open the rear stacker to collect the printed
output. This will give the paper a nearly straight path through the machine,
avoiding paper jams and damage to the paper.
3. e-STUDIO382P: If required, set the media size and orientation in the media menu
using the control panel, then issue the print command.
e-STUDIO332P: If required, set the media size and orientation in the Configuration
Tool, then issue the print command.
P
APER FEED
,
SIZE AND MEDIA SETTING
The process used to fuse (fix) the printed image to the paper involves a mixture of pressure
and heat. Too much heat will cause lightweight paper to crease or curl and corrugations in
transparencies. Too little heat will cause the image not to fuse fully into heavyweight paper.
e-STUDIO332P
You can change the media type as follows:
1. Start the Configuration Tool.
2. Expand the User Menu to list the options.
3. Expand the Media Menu to list the options .
4. Click on the paper tray being used. Adjust the media type to the required setting
and, if necessary, the paper size to the size of the paper being used.
5. Click Save to Device icon, to save the new settings.
6. Click OK.
NOTE
Do not select Duplex printing on envelopes.
CAUTION!
Damage to the printer may occur if the incorrect paper setting is
used when printing on a different media.
NOTE
> You can also set the media type in your printer driver. However, the
printer driver settings will override the settings on the control panel or
Configuration Tool.
> Remember to reset the printer for normal paper after printing on a
different media.
NOTE
Although media properties can be set in the printer driver for particular jobs,
when filling a tray with media it is recommended that you manually set the
printer to match the media as described here.