Toshiba e-STUDIO 332P Скачать руководство пользователя

Страница: 66 / 82

Troubleshooting > 66

ROUBLESHOOTING

TATUS

AND

ERROR

MESSAGES

Your printer has been designed to give you helpful status feedback not only during normal

operation but also if a printing problem occurs so that you can take appropriate corrective

action.
The LCD on the printer operator panel provides the self-explanatory status and error

messages in your chosen language. Error messages are accompanied by the Ready

indicator being extinguished.

APER

AMS

Provided that you follow the recommendations in this guide on use of print media, and you

keep the media in good condition prior to use, your printer should give years of reliable

service. However, paper jams occasionally do occur, and this section explains how to clear

them quickly and simply.
Jams can occur due to paper misfeeding from a paper tray or at any point on the paper

path through the printer. When a jam occurs, the printer immediately stops, and the

operator panel informs you of the event. If printing multiple pages (or copies), do not

assume that having cleared an obvious sheet that others will not also be stopped

somewhere along the path. These must also be removed in order to clear the jam fully and

restore normal operation.
The printer may experience a paper jam in one of three areas.

INPUT JAM - paper has failed to leave the selected feed tray and enter the internal

paper path of the printer. A typical message indicates a paper jam and identifies the

tray to check.

FEED JAM - paper has entered the printer but failed to reach the exit. A typical

message indicates a paper jam and advises you to open the top cover for access.

EXIT JAM - paper has reached the exit but has failed to exit completely from the

printer. A typical message indicates an exit jam and advises you to open the top

cover for access.

Содержание e-STUDIO 332P



















































































Результаты поиска

Содержание e-STUDIO 332P

Отзывы:

Похожие инструкции для e-STUDIO 332P

Бренды по названию

Популярные бренды

Toshiba e-STUDIO 332P, Руководство пользователя

Результаты поиска

Содержание e-STUDIO 332P

Отзывы:

Похожие инструкции для e-STUDIO 332P

Бренды по названию

Популярные бренды