.
6 (GB) Safety Information
For the U.S.A. only
Indicates that the products affixing this mark use laser and potential risk and
hazard of eye or optic damage and/or skin burns if not avoided. Please follow
the cautions described near this mark.
Indicates that the locations affixing this mark are high temperature and have
potential risk and hazard of skin burns and/or relating damage if not avoided.
Please do not touch the location and its peripheral area.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC
or parties authorized by TOSHIBA TEC, could void the user’s authority to operate the
equipment.
User Safety
This TOSHIBA Multifunctional Digital Systems does not produce laser radiation hazardous to
the user. It is certified as a Class 1 laser product under the U.S Department of Health and
Human Services (DHHS) Radiation Performance Standard according to the Radiation
Control Health and Safety Act of 1968 including amendments.
Protective housing and external covers completely confine the laser beam light emitted inside
the Multifunctional Digital Systems. The laser beam cannot escape from the machine during
any phase of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of
the U.S Food and Drug Administration apply to laser products manufactured from August
1,1976. Laser products marketed in the United States must comply with these regulations.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
