manualshive.com logo in svg

Toshiba e-studio 167, Руководство оператора по функциям копирования, Страница: 27 / 220

Поделиться
Скачать
Toshiba e-studio 167 Скачать руководство пользователя страница 27

Environmental Information    25

Environmental Information

ENERGY STAR

®

 Programme

Toshiba Tec Corporation, as a member of the ENERGY STAR Programme, confirms that this 
product meets the ENERGY STAR Programme requirements.

The ENERGY STAR Programme aims at the promotion of the development and wider usage of 
office equipment including energy-efficient computers in order to address environmental issues 
such as global warming. Manufacturers that participate in this programme can attach the 
ENERGY STAR logo to products after confirming that they meet the energy saving standards of 
this programme. Also, these standards and logo are commonly used within the U.S. Environ-
mental Protection Agency (EPA) and participating countries.

Energy saving features

Energy saving features are provided in this product in order to reduce power consumption when 
it is not being used.

Low power mode

The equipment automatically enters this mode when a specified period of time

*1

 (the default set-

ting at the time of shipment: 5 minutes) has passed since the last use.

*2

 “Saving energy” 

appears on the LCD screen.

Sleep mode

The equipment automatically enters this mode when a specified period of time

*1

 (the default set-

ting at the time of shipment: e-STUDIO167/207: 20 minutes, e-STUDIO237: 30 minutes) has 
passed since the last use.

*2

 “Sleep mode” appears on the LCD screen

*3

.

*1 The period from the last use to the time the equipment enters the low power mode or the sleep mode 

can be changed. See the following page for details:

 

 P.127 “Timer Setting”

*2 In the sleep mode, the equipment starts warming itself up when print data are received, or when any but-

ton on the control panel is pressed. When the warm-up has been completed, the equipment goes into 
the ready status and starts printing out the data.

*3 This message appears when the Network Printer Kit (optional) is installed, or when this equipment is 

connected to a PC with a USB cable. If this equipment is stand-alone, the display on the LCD screen 
goes off.

Содержание e-studio 167





























































































































































































































Отзывы:

Нет отзывов