Toshiba e-Studio 1057, Быстрый старт

Страница: 32 / 36

32
This function is used to forward all data sent and received by the machine to a specified des -
tination (Scan to E-mail address, Scan to FTP destination or Scan to Network Folder destina-
tion). This function can be used by the administrator of the machine to archive all sent and re-
ceived data. To configure the document administration settings, click [Application Settings] and
then [Document Administration Function] in "Settings mode". (Administrator rights are required.)
The forwarding data, exposure, and resolution settings of sent and received data
remain in effect.
ADMINISTRATOR
Account Password
User users users
Administrator admin admin
System administrator sysadmin sysadmin
Do not forget the new administrator password.
An administrator password is required to configure the machine settings using administrator
rights.
The settings can be configured from either the operation panel or by using a computer web
browser.
After setting up the machine, refer to "Settings mode" in the User’s Manual to set a new
password.
The same administrator password is used for the operation panel and the Web page.
If the administrator changes a password on the operation panel, the password will be
valid when logging in to the Web page.
Password for logging in from a computer
As factory default, "Administrator" is the only account allowed to log in from a Web browser. By
setting user authentication, "System Administrator" will also be allowed to log in from the Web
browser. You can also specify a device account as a login user.
The factory default passwords for respective accounts are shown in the following.
Logging in as an "Administrator" or "System Administrator" allows you to manage all the
settings available via Web browser.
Forwarding all sent or received data to the administrator (document administration function)
Setting mode password