Toshiba dynaEdge DE-10 Series, Руководство пользователя

Страница: 78 / 137

BIOS
Problem Procedure
The computer
cannot be powered
on Disconnect the AC adaptor and remove the battery
for several seconds. Then reinstall the battery and
reconnect the AC adaptor. After that, press the
power button.
If it does not work, press the power button twice
again.
If it still does not work, press and hold the power
button for 12 seconds.
Real-Time Clock (RTC) information might be
cleared if the power is turned on by pressing the
power button. You should set the system date/time
manually in TOSHIBA Setup Utility.
If it still does not operate properly, you should
contact your reseller or dealer.
Internal Storage Drive
Problem Procedure
Computer does not
boot from internal
storage Check to see whether there is a disc in the external
optical disc drive - if so remove it and try to start
the computer again.
If this has no effect, check the
Boot Setting setting
within the TOSHIBA HWSetup.
Slow performance You should perform a Windows Factory Reset
following instruction in
System Recovery .
Memory Media Card
For further information, refer to Operating Basics .
Problem Procedure
Memory media card
error occurs Remove the memory media card from the
computer and then reinsert it to ensure that it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
User's Manual 6-7