background image

Problem

Procedure

The mouse pointer
moves erratically

The elements of the mouse responsible for
detecting movement might be dirty. Refer to the
documentation supplied with the mouse for
instructions on how to clean it.
If you are still unable to resolve the problem,
contact TOSHIBA Support.

USB device

In addition to the information in this section, also refer to the documentation
supplied with your USB device.

Problem

Procedure

USB device does not
work

Remove the USB device and then reconnect it to a
free port in order to ensure that it is firmly attached.
Ensure that any required USB device drivers are
properly installed. To achieve this, you should refer
to both the device documentation and the
operating system documentation.

Sound system

In addition to the information in this section, also refer to the documentation
supplied with your audio device.

Problem

Procedure

No sound is heard

Check the software volume settings.
Check to see if Mute is turned to Off
Check to make sure that the headphone
connection is secure.
Check within the Windows Device Manager
application to ensure that the sound device is
enabled and that the device is properly working.

Annoying sound is
heard

In this instance, you might be experiencing
feedback from either the internal microphone or an
external microphone connected to the computer.
Refer to 

Sound System

 for further information.

Volume cannot be adjusted during Windows start
up or shut down.
If you are still unable to resolve the problem,
contact TOSHIBA Support.

User's Manual

6-9

Содержание dynaEdge DE-10 Series










































































































































Отзывы: