23
5-2.1 MOTION SETUP
Users can enable or disable the functions of motion detection and popup. The cameras
can also be setup individually on sensitivity (this means at what level the camera is to
determine the movement as a motion), and the region that requires detection.
Note that to use motion detection by schedule, you must enable this function here,
as well as enable this function in record setup. For detail, please refer to Section
5-1.
Table 5-2.2
The options in motion setup
Item
Description
MOTION DETECTION
Check the box to enable
∕
disable m otion detection for all
channels.
MOTION POPUP
Check the box to enable
∕
disable popup screen function for all
channels. When motion is detected in LIVE mode, the
detected channel image will pop up in full screen display.
1~4
You can setup independently for each channel.
SELECTED CHANNEL
TURN
Check the box to enable
∕
disable motion detection for each
channel.
OBJECT SIZE
Drag the white bar or press
⊳
to set up Object Size from
value 1 to 15 for each channel. The lower value you set the
higher sensitivity it will be. Value set up as 1, the motion will be
detected easiest.
SENSITIVITY
Drag the white bar or press
⊳
to set up Sensitivity from
value 1 to 15 for each channel. The lower value you set the
higher sensitivity it will be
MOTION AREA SETUP
Enter to setup motion detection area
Mark Motion Detection to
make sure it works!
