20
5-1 RECORD SETUP
Record setup enables the users to enable or disable the recording modes, as well as
the recording quality and frame rate. Please click on the recording modes you wish to
enable.
Note that, to enable motion detection or sensor detect in schedule, please enable
(1) ”Schedule – Motion” and “Schedule - Sensor”, as well as (2) enable these
function in the event setup. For detail, please refer to Section 5-2.1 on motion
detection and Section 5-2.2 for sensor.
Table 5-1.1
The options in record setup
Item
Description
HDD FULL
Select STOP to stop recording or OVERWRITE to reuse the
HDD when HDD is full
「
STOP
」：
Stop recording when HDD is full.
「
OVERWRITE
」：
Start to overwrite that begin from the oldest
data of HDD, and continue to record.
RECORD NORMAL
Enable
∕
disable normal recording
