- 22 -
To enable AUTO PATROL:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to AUTO PATROL and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to scroll through the presets. Move the joystick left or right to turn
the preset ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.7 SCAN SPEED
The SCAN SPEED for auto scan, random scan and frame scan can be set from 1-90 degrees/sec.
However, this speed is limited by MAX SPEED setting.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
PAN/TILT MENU
AUTO FLIP ON
PROPORTIONALP/T ON
SCAN LIMIT STOPS OFF
MANUAL LIMIT STOPS OFF
PARK TIME MIN 0MIN
AUTO PATROL P1
→
OFF
SCAN SPEED 5DEG./S
SCAN TILT ANGLE 30DEG.
STOP TIME 10SEC
MAX SPEED 400DEG/S
To set SCAN SPEED:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to SCAN SPEED and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to set the speed.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
Downloaded from
www.Manualslib.com
manuals search engine
