- 8 -
6.2 Preset Commands
The dome camera can set and perform various preset commands. The following table lists the
preset number and whether is can be set (SET) or performed (GO).
Presets 1-32 and 35-66 are user presets. Refer to your model's instructions for information on
inputting preset commands.
Preset Number
Function
1-32 SET/GO
Preset position 1-32
33 GO
Flip
34 GO
Home (return to 0 pan position)
35-66 SET/GO
Preset position 35-66
70 GO
Begin Auto patrol
71 GO
Backlight compensation ON
72 GO
Backlight compensation OFF
73 GO
One push WB
74 GO
One push trigger AF
75 GO
Software version Display
76 GO
P/T Initialize
83 SET
Privacy Zone Setup menu mode
88 GO
Color Mode IR Cut filter ON
89 GO
Monochrome Mode IR Cut filter OFF
90 SET
Set manual left limit stop
91 SET
Set manual Right limit stop
92 SET
Set Scan Left Limit Stop
93 SET
Set Scan Right Limit Stop
95 SET
Enter Menu Mode
96 GO
Stop Scan
97 GO
Begin Random Scan
98 GO
Begin Frame Scan
99 GO
Begin Auto Scan
6.3 PROGRAMMING PRESETS
Programming presets varies with the model controller being used. Several controllers are listed
below. Please refer to your model's instructions for information on inputting preset commands.
JK-UC1
Input the desired preset using the numeric keypad.
Press the SHIFT key.
The LED will light up.
Press the PRESET key.
VLC485
Input the desired preset using the numeric keypad.
Press the # key.
Press the PRESET key.
Downloaded from
www.Manualslib.com
manuals search engine
