Toshiba DB-EA4D, Руководство пользователя

Страница: 35 / 80

5. PRINTER SETUP
ENGLISH VERSION
5.4 Menu Mode
E5-7
5.4 MENU MODE
Sequence:
4. There are two different ways to enter Menu Mode.
a) When the printer is powered off,
press and hold [
MENU
] key
and turn the printer on.
b) When the printer is on and in READY
or PAUSE state,
press and hold [
MENU
] Key for three seconds.
5. All I/F are in BUSY state during this mode.
And a message appears on the LCD, as shown below.
6. During the above message is displayed,
a) Press [
FEED
] Key shortly, it enters the Menu Mode.
b) Press [
MENU
] Key shortly, it exits this mode and shifts to READY state.
c) Press [
FEED
] Key long (around 3 seconds), it exits this mode and shifts to READY state.
Key function in Menu Mode
Key Function
Menu Mode
Press FEED Key
NOTE:
Please refer to Appendix II for Menu Mode Tree of this 2ST Printer.
Power OFF
READY
Power ON
Menu Mode
Press and hold [MENU] key
+
turn the printer on
Press and hold [MENU] key for 3 sec
Firmware Version, CRC
Communication Interface
Printer Configuration
Printer Adjustment
Printer Test Modes
Sensor Calibration
Menu Mode Exit