background image

Playback

66

EN

Basic playback (cont’d)

6

  Select the desired title using [

K

 / 

L

/

{

 / 

B

], 

then press [ENTER]. 

<Video mode>

Pop-up window will appear.

7

  Select “Play” using [

K

 / 

L

], then press 

[ENTER]. 

Playback will start.

8

 Press [STOP 

C

] to stop playback. 

To eject the disc, press [OPEN / CLOSE 

A

] to open the disc 

tray, then remove the disc. 
Press [OPEN / CLOSE 

A

] to close the disc tray before turning 

off the unit.

Title List

01/ 01/06 01:00 P12 XP

4

5

6

2

3

1

Notes

• For DVD-R (Video mode) and DVD-RW (Video mode) discs 

that are already finalised, a title list will be displayed instead 

of thumbnails.

• If you insert a DVD-RW recorded in VR mode and it has a 

Playlist, the Playlist is displayed.

• You can resume playback from where you stopped playing 

back the disc (Resume playback). 

See page 72 for details.

• You can also start playback by pressing  [PLAY 

B

] instead 

of [ENTER] at step 6.

• Some discs may start playback automatically.

Title Menu

1  22/01/06  12:55 

P10

2  30/01/06  11:00 

P8

3  10/02/06  13:00 

P10

4  28/02/06  11:00 

P6

5  28/02/06  10:00 

P8

XP

XP

LP

LP

EP

06̲Playback̲BD.indd   66

06̲Playback̲BD.indd   66

2006/02/24   18:03:31

2006/02/24   18:03:31

Содержание D-R160SB




































































Отзывы: