Toshiba D-R160SB Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 67

background image

Introduction

2

EN

Precautions

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Laser Safety

This unit employs a laser. Only a qualified service
personnel should remove the cover or attempt to service
this unit, due to the possibility of eye injury.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN AND INTERLOCK DEFEATED. DO NOT STARE

INTO BEAM.

LOCATION:

INSIDE, NEAR THE DECK MECHANISM.

Power Supply

The power supply is connected and the unit is live when
the mains cable is plugged into a 220-240 V~, 50 Hz AC
outlet. To operate the unit, press [I/

y

y

ON/STANDBY].

WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY

SCREWS.

Caution

1. Do not attempt to open the cabinet. There are no

parts inside you can service. Refer all servicing to
qualified service personnel.

2. Slots and openings in the cabinet at the sides and

underneath are provided for ventilation. To ensure
reliable operation and to protect the unit from
overheating, these openings must not be blocked or
covered.
Avoid installation in enclosed spaces such as
bookcases unless suitable ventilation is provided.

3. Keep the unit away from radiators and other heat

sources.

4. Avoid use near strong magnetic fields.
5. Do not push objects of any kind into the unit through

the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in
a fire or electric shock.

6. Do not spill liquid on the unit. If liquid is spilled and

enters the unit, consult qualified service personnel.

7. Do not stand the unit vertically. Use the unit in a

horizontal (flat) position only.

8. Before attempting to operate the unit, make sure

that the timer recording mode is off.

9. This product is in Stand-by mode when turned off

while the mains cable is connected.

10. Do not place any combustible objects on the device

(candles, etc.).

11. Before moving the unit, be sure to remove any discs

and unplug the mains cable from the AC outlet.

12. Disconnect the mains plug to shut off when find

troubles or not in use.

13. The mains plug shall remain readily operable.
14. Read both manual instructions to ensure correct and

safe installation and interconnection of the unit in
multimedia systems.

15. Keep the distances 20 cm around apparatus of

ventilation openings.

The important note is located on the rear of the cabinet.

02̲Introduction̲BD.indd 2

02̲Introduction̲BD.indd 2

2006/02/24 18:01:11

2006/02/24 18:01:11

«
1
2
3
4
...
»

Содержание D-R160SB




































































Отзывы:

Нет отзывов

Похожие инструкции для D-R160SB

Бренд: Olympus Страницы: 44

Бренд: Velleman Страницы: 38

Бренд: EDIC-mini Страницы: 8

RCD-W50C - Cd/cdr Recorder/player

Бренд: Sony Страницы: 35

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 6

Бренд: Sony Страницы: 38

4-113-168-11(2)

Бренд: Sony Страницы: 76

Бренд: YOKOGAWA Страницы: 256

Бренд: Olympus Страницы: 2

Бренд: YOKOGAWA Страницы: 272

Бренд: Tascam Страницы: 56

DIGITAL VOICE RECORDER WS-200S

Бренд: Olympus Страницы: 2

Бренд: Olympus Страницы: 67

Бренд: Packard Bell Страницы: 193

Бренд: Packard Bell Страницы: 208

Easy DVD Recorder

Бренд: Packard Bell Страницы: 262

Бренд: MadgeTech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды