29
EN
FUNCTION SETUP
Category
Menus / Options
Description
Custom
Audio
HDMI Audio Out*
• This feature is
available only
when the display
device is
connected by an
HDMI cable.
• Refer to page 33
for more
information.
HDMI Multi
(Normal)
Outputs the multi-channel
audio signals from HDMI
OUT jack with bitstream or
LPCM.
Sets the audio format for
the sound output from the
HDMI OUT jack.
• For “Speaker Size” and
“Delay Time”, if you
change the setting of
one speaker, the rest of
the speakers will be set
automatically.
For “Delay Time”,
difference of the values
among “Front”,
“Surround” and
“Surround Back” cannot
exceed 4.5m (15 ft), and
between “Front” and
“Center” it cannot exceed
1.5m (5 ft).
• For “Delay Time”, the
value of “Center”,
“Surround” and
“Surround Back” cannot
exceed the value of
“Front”.
HDMI Multi
(LPCM)
Speaker
Size
Front
Large
Sets the speaker
configuration to suite the
size/number of your
speakers.
Press
[ENTER]
to change
the setting.
Center
Small
Subwoofer On
Surround Large
Surround
Back
Small
Default
Channel
Level
Test Tone Off
Outputs the test tone from
each speaker.
Use
[
s
/
B
]
to switch
options, then press
[ENTER]
to confirm.
• Test tone will be output
automatically.
• To stop the test tone,
press
[RETURN]
.
“Manual”:
Allows you to manually
select the speaker to test.
Use
[
K
/
L
]
to select the
speaker.
Use
[
s
/
B
]
to adjust the
volume.
“Auto”:
Automatically tests all
speakers.
Use
[
s
/
B
]
to adjust the
volume.
Manual
Auto
Front Lch -12 to
0dB
(Default
0dB)
Sets the volume level for
each speaker to get the
ideal audio balance.
Use
[
s
/
B
]
to change the
setting.
Center
Subwoofer
Front Rch
Surround
Rch
Surround
Back Rch
Surround
Back Lch
Surround
Lch
Default
Delay
Time
Distance Feet
Sets the desired measure
system. This measure
system will be used for
“Delay Time” setting.
Use
[
s
/
B
]
to change the
setting.
Meters
Front
0 to 18m
(Default
3.6m)
Sets the distance from the
listening point to the
speaker to get the ideal
delay time.
Use
[
s
/
B
]
to change the
setting.
Center
Surround 0 to 18m
(Default
3.0m)
Surround
Back
Default
Audio Mute
• Refer to
“Digital
Out”
setting on
page 34
for setting
options.
Digital
Out
Bitstream
“Bitstream”
:
When playing back discs
recorded in Dolby Digital,
Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD,
the corresponding core
stream (Dolby Digital or
DTS) are output.
“LPCM”
:
LPCM signal will be output
from DIGITAL OUT jack.
Sets the audio format
output from DIGITAL OUT
jack.
LPCM
INTRODUCTI
ON
CONNE
C
T
IONS
PLAY
BAC
K
FUNCTI
O
N
S
E
TUP
OT
H
E
R
S
E5RJ0BD_EN.book Page 29 Tuesday, October 20, 2009 3:53 PM
