8
EN
INTRODUCTION
(*) The unit can also be turned on by pressing these buttons.
1.
ON/STANDBY
Q
button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
2.
ON/STANDBY
Q
indicator
3.
PAUSE
F
button
4.
STOP
C
button
5.
PLAY
B
button*
6.
OPEN/CLOSE
A
button*
7.
Disc tray
8.
Display
• Refer to “Front Panel Display” on page 11.
9.
Infrared sensor window
10. SD card slot
1.
LAN terminal
• Use to connect a network equipment with LAN
cable.
2.
HDMI OUT jack
• Use to connect a TV with an HDMI compatible port
using an HDMI cable.
3.
AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or
other device with a composite audio cable.
4.
COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs
with a component video cable.
5.
AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
6.
DIGITAL OUT (OPTICAL / COAXIAL) jacks
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio optical / coaxial input jack with a digital audio
optical / coaxial cable.
7.
VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device
with a composite video cable.
Front Panel
ON/STANDBY
OPEN/CLOSE
PAUSE
STOP
PLAY
1
2 3 4 5*
7
8
9
6*
10
Rear Panel
P
R
/C
R
P
B
/C
B
Y
L
R
COMPONENT
VIDEO OUT
AUDIO
VIDEO
COAXIAL
OPTICAL
HDMI
OUT
LAN
DIGITAL OUT
PCM/BITSTREAM
OUT
5
7
6
3
2
1
4
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
