28
EN
PLAYBACK
This function plays back approximately at 1.3 times the
normal playback while keeping the sound output. This
function is available only on discs recorded in the Dolby
Digital format.
1
During playback, press [MODE] repeatedly
until the Rapid playback setting appears.
2
Press [ENTER] or [
s
/
B
] to switch
(1.3x), or
off.
3
Press [PLAY
B
] to return to normal playback.
You can adjust the picture quality.
1
During playback, press [MODE] repeatedly
until
appears.
2
Use [
K
/
L
] to select your desired item, then
use [
s
/
B
] to adjust the setting.
S
Black level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
S
Noise reduction (DVD-video only)
Reduces the noise of the playback picture.
3
Press [RETURN] to exit.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1
During playback, press [MODE].
2
Use [
K
/
L
] to select your desired setting.
3
Press [RETURN] to exit.
Rapid Playback
“Off”
: Plays back in normal speed.
“
”
: Plays back approximately at 1.3 times of normal
playback.
Note
• Picture adjustment and audio language setting
cannot be changed during this function.
• Virtual surround does not work during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM will be output from
HDMI OUT jack and DIGITAL OUT jack.
Adjusting the Picture
“On”
: Enhances detail in darker areas.
“Off”
: Shows the original picture as recorded.
Off
Black Level
Noise Reduction
On
Off
e.g.) DVD-video
“Off”
: Shows the original picture as recorded.
“1”
: Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
“2”
: Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
subtitles on the movie.
“3”
: Executes both MPEG noise reduction and 3D
noise reduction.
Note
• The setting will remain the same even if the unit is
turned to the standby mode.
• “Black Level” is not effective under the following
conditions.
- When the picture is output from HDMI OUT jack.
- When the picture is output from COMPONENT
VIDEO OUT jack with “Component Output” set to
“480p / 720p / 1080i”.
• You cannot adjust the setting during rapid playback.
Virtual Surround
“Off”
: No surround effect
“1”
: Natural surround effect
“2”
: Stronger surround effect
Note
• Set the virtual surround setting to “Off” or lower the
volume if the sound is distorted.
• Virtual surround does not function during rapid
playback.
• For the virtual surround, audio signal will always be
2-channel LPCM.
Off
