background image

25

Using the softener

Please refer to the instruction manual of softener 
for amount and method before using.
When the machine is operating, please press 

       before adding softener. 

 Please add softener with appropri-

ate amount into the softener dis-
penser, on the basis of reference 
value displayed. The softener will 
be added automatically into the tub 
during the final rinsing. 

 Please keep the case of softener 

well. 

Tips

 Please make sure to press the softener dispenser in place. 

Do not have the agent level higher than the cover brim of the 
box. Otherwise, too much agent will overflow during washing. 

 Please do not leave softener in the case for a long time, 

otherwise it may become solidified. 

 Please avoid splashing the agent onto operating panel, if any, 

clean it immediately. 

 Please do not open the case during rinsing & flowing water, 

otherwise the water may splash out. 

 Due to the siphoning structure, some liquid may remain inside 

the case, which is not abnormal. 

 Condensed liquid may be too thick to add. Please dilute it with 

the ratio of 1:2 before adding.

When liquid detergent and bleacher are used

Please refer to the instruction manual of deter-
gent and bleacher for amount and method before 
using. 

Liquid detergent

 Please add it into the entry gate of detergent and bleacher or 

the one of liquid bleacher.

 When liquid soap is frequently used, please implement “Tub 

cleaning” regularly to eliminate soap gas that usually appears.

Liquid bleacher

 Please dilute the bleacher with 3 times of water before adding 

it into the entry gate of detergent and bleacher or the one of 
liquid bleacher.

 Please do not add the bleacher directly into Washing-Spinning 

tub or splash it onto clothes. Otherwise it may cause discolor 
or cloth damage. 

 While using PRESET mode, please add soap powder before 

adding liquid bleacher. 

Powder bleacher

 Please add it into the entry gate of detergent and bleacher.

 When changing the position of the entry gate

 

 Power on and open the cover, then set to Spinning only 

and start. When “E21” is displayed, please turn the 
washing-spinning tub with hand to an appropriate position 
for adding detergent and bleacher. Turn off the system. 

LAUNDRY GUIDE

Softener  

(formulated concentrate)

Water

Water

Measuring cap

 Please add softener into the case before the end of washing. 

It will be automatically added into tub during final soaking & 
rinsing. 

When is the best for adding softener?

Add softener during

Add softener during

Flowing water

Washing

Final rinsing

 

   

   

 

Cap brim

Until here

Cap

Содержание AW-DC1000CM





































Отзывы: